Advertisement
Hydraulic Top Link Option:
The Tractor must have multiple hydraulic ports available in order to use the optional Hydraulic Top
Link option for the TR3! Some Tractor models may require an extender in order to use the Hydraulic
Top Link properly. Confirm that the standard stroke for the Hydraulic Top Link is sufficient for use with
the Tractor model the option will be used on.
TR3/Tractor and attach using a hitch pin to the TR3/Tractor. The hydraulic top link is now ready for use.
Maintenance:
Check all hardware, including pins and cotter pins; daily to ensure hardware is properly secured and free
of damage. If hardware is found to be damaged or not properly secured, replace or secure hardware
before operating the TR3.
Check all hydraulic components daily to ensure they are free of damage or leaks, and that they are
operating properly. If any hydraulic components are damaged or leaking, replace the parts before
operations. If components are not operating properly contact ABI Customer Service for information on
trouble shooting the components.
Make sure to grease the wheel hub bearings every 3 months, or more frequently for high use or
extremely dusty environments. Grease wheel hub bearings before/after any long period of storage.
ABI
(Absolute Innovations, Inc.)
1. Attach the hydraulic top link to the Tractor replacing the manual top link.
For tractors with enclosed mounting areas the hydraulic top link may need
to be mounted with the body of the hydraulic top link attached to the TR3
with the shaft attached to the Tractor. If the hydraulic top link must be
mounted with the body of the hydraulic top link on the TR3, ensure the
hoses will be long enough to reach the tractor when the hydraulic top link
is fully extended before operating the TR3.
2. Hook the hydraulic hoses of the hydraulic top link to the hydraulic
fittings on the tractor.
3. Extend out the hydraulic top link shaft so that it can be attached to the
- 855-211-0598 -
www.abiattachments.com
Page 7 of 8
Advertisement
