Related Manuals for ABI Attachments Force Z-23
Summary of Contents for ABI Attachments Force Z-23
- Page 1 Rev A | 8-24-2020 Product Instruction Sheet ABI Force Z-23 Rear Rake Attachment Designed to be used solely behind the ABI Force Z-23...
-
Page 2: Unpacking Instructions
Unpacking Instructions: Unit Setup and Adjustments: Scarifier Pitch Adjustment Tools Needed: The Top Link will be shipped with the threads fully engaged within the main body of the Top Link and 1 end not bolted Safety Glasses • to the frame (for shipping purposes). Rotate Axle Frame Assembly so that Tongue and Gage Wheels (Tire) are facing Gloves •... - Page 3 Rake Pitch (angle) adjustment: The Rake pitch (angle) is adjusted by the Rear Link. You will want to have the initial setup to have about 1" of thread showing on both ends of the Link (similar to the Top Link). 2 pin height Once the desired rake pitch is set, tighten the nut to prevent adjustments...
- Page 4 Rear Lift Raise Rear Lift to have easy access to Hitch/Receiver. Slide Auto-recentering Hitch into the Force Z-23 Reciever and Pin. (See Figure 5) The Auto-Recentering Hitch allows the unit to automatically recenter behind the Force when lifted off the ground for Auto-recentering transportation.
-
Page 5: Service Parts
Service Parts ITEM PART # DESCRIPTION 10-40489 WHEEL AXLE 10-31074 24" FINISH RAKE. EXT. SILVER 1/2" RH 10-50001 12" COMB, 1/2" 10-31075 24" FINISH RAKE. EXT. SILVER 1/2" LH 10-10048 SCARIFIER SHANK 10-10047 SCARIFIER TIP 10-60067 HUB/TIRE ASSEMBLY 10-20232 LYNCH PIN 10-20221 BENT PIN 10-20220...