Maintenance - ABI Attachments ABI Force Z-23 Owner's Manual

Maintenance

Service Schedule
Daily
Check Engine Oil
Check Hydraulic Oil
Check Fuel
Check Tire Pressures
Blow out engine compartment and cooling fans
Check attachment wear parts
After First 25 Hours
Change Engine Oil and Filter
Check Lugnut torque
Every 50 Hours of Operation
Blow out engine compartment and cooling fans
Grease pivot points and front wheels
Inspect Outer Air filter element
Inspect for loose fasteners
Inspect hydraulics for leaks and moving hoses for damage
After First 100 Hours
Change Hydraulic Oil and Filter
Check Lugnut Torque
Every 100 Hours of Operation
Change Hydraulic Oil and Filter
Check Lugnut Torque
Every 200 Hours of Operation
Replace Fuel Filter (EFI specific)
Every 300 Hours of Operation
Replace Inner Air Filter element
Every 500 Hours of Operation
Change Hydraulic Oil and Filter
Lubricate Pump Driveshaft
Replace Spark Plugs and set gap
NOTE: Maintenance is critical to ensuring the longevity of the ABI Force. Failure to perform neccesary maintenance could void the
warranty. For additional information on maintaining the ABI Force contact Customer Support.
SAE 30 or 5w-40 Full Synth Engine Oil
SAE 5w-40 Full Synth Only
87 Octane E10 or less Regular Gasoline
Front 25 psi |
Kohler part 52 050 02-S filter
90-120 ft lbs
Kohler part 25 083 01-S
5w-40 Full Synth Oil
90-120 ft lbs
Kohler part 52 050 02-S filter
90-120 ft lbs
Kohler part 25 050 42-S Only
Kohler part 25 083 04-S
5w-40 Full Synth Oil
Kohler part 25 357 12-S only
Kohler part 25 132 12-S at 0.03" gap
23
Rear 20 psi
| Lenz CP-752-10 Filter
| Lenz CP-752-10 Filter