After the installation
■ Test all functions. The "Using Your System" section of the Owner's Guide is very helpful when testing.
■ When testing, don't forget that this system is equipped with Nuisance Prevention® Circuitry (NPC). NPC
can bypass both sensor zones, making them appear to stop working.
■ Carefully reassemble the under-dash trim panels.
■ Inspect the engine compartment for tools that may have been left behind.
Tools required
This is a general list of tools required to complete the installation of this security system for most vehicles.
Some vehicles may require additinal tools.
■ Digital multi-meter
■ Nutdriver and/or socket set
■ Wire cutters/strippers
■ Panel removal tool
■ Solderless terminal crimpers
■ Drill bit set
■ Cordless power drill
■ Phillips head screwdriver
■ Torx driver set - Work light
© 2007 Directed Electronics—all rights reserved
7