Table of Contents
Advertisement
N7/3 ORANGE/BROWN or BROWN/BLACK – FT CAN Bus Low or HS CAN bus Low (present only in Fault
Tolerant or High Speed CAN Security Systems such as 3901V for FT and 3903V for HS, respectively.)
Connect this wire to the vehicle CAN Low wire. (Check for color and location on the vehicle application
list or on the website).
Plug-in harnesses
Integrated LED/VALET®/switch, 2-pin BLUE and 2-pin White plugs
The integrated LED VALET®/switch should be accessible from the driver's seat. The VALET® part of the
switch plugs into the BLUE port on the side of the unit. Check for rear clearance before drilling a
5/16 -inch hole and mounting the swicth. The LED part of the swicth operates a 2V DC and plugs into the
white port on the side of the unit. Make sure the LED wires are not shorted to ground as the LED will be
damaged.
WHITE
GRAY
BLACK
BLUE
Data port-Bitwriter
The black three-pin port can be used for programming the unit using the Directed Bitwriter, a hand held
programming tool. The Bitwriter also allows programming of the features that are not available in the
features menus.
16
Advertisement
Table of Contents
