Table of Contents
Advertisement
Multi-level security arming
Multi-Level Security Arming allows the user to select sensors to be active or bypassed when the system is
armed. Multi-Level Security Arming can only be accessed if the function is set ON (option 3-2)
By pressing the LOCK button more than once within 3 and 7 seconds of arming the system activates Multi-
Level Security Arming. If the LOCK button is pressed again the unit cancels the bypass of the sensors. There
are different security levels which can be selected, as follows:
Step
Lock Button pressed
Number of Siren/Horn
Chirps
1
Once
1 Chirp
2
Twice
3 Chirps, 3 flashses
3
If the Lock button is pressed again anytime, the system will return to step 1.
The user can repeat the steps provided the LOCK button is pressed between
3 and 7 seconds and no other buttons are pressed.
Disarming without the original vehicle remote (system override)
This feature allows you to override the system without the transmitter should it be lost, damaged or
disabled. To do this, you must have the vehicle's ignition key and know where the integrated LED/VALET®
switch is located.
Turn the ignition to the "run" position. Press and release the integrated LED/VALET® switch the programmed
number of time (1-5), within 10 seconds. After a few seconds the LED will stop flashing and the vehicle
should start. If it does not, you may have waited too long. Turn the ignition off and try again.
20
Armed State with Zone
Bypassed
No Zone Bypassed
Zone 2 & 4 Bypassed
© 2007 Directed Electronics—all rights reserved
Advertisement
Table of Contents
