Table of Contents
Advertisement
Features description
Menu 1 – Basic User's Features
1-1 ZAP (Reset all features to default): This setting will reset all the features to factory default.
1-2 CHIRPS ON/OFF: This setting controls the systems arming & disarming chirps.
• Chirps ON (default): the system will emit chirps when arming and disarming.
• Chirps OFF: the system will NOT emit chirps when arming and disarming.
1-3 HORN FUNCTION (FULL ALARM ONLY)/SIREN FUNCTION (20mS, 30mS, 40mS, and 50mS): This setting
controls if the output used by the alarm when fully triggered is the horn or the siren (in the last case dif-
ferent timing options for chirps can be selected).
1-4 SIREN DURATION 30/60 SECONDS: This setting changes the siren output from 30 seconds to 60 seconds
duration when in the panic mode and when the system is fully triggered. The siren duration can also be
programmed from 1-180 seconds in 1 second increments using the Bitwriter®.
Menu 2 – Advanced user's features
2-1 LIGHT FLASH CONFIRMATION ON/ OFF: This setting control the light flash confirmation of the security
system on arming or disarming. When set ON, the security system will control the light confirmation of
arming/disarming of the vehicle. When set OFF, the security system will not control the lights confirmation
when arming/disarming the vehicle (the original confirmation light of the vehicles will be the only one
present on arming/disarming). Note: When (-) input blue/white status shunt is active, the parking lights
flash in case it is used for remote start.
2-2 PARKING LIGHT SUPERVISION ON/OFF: When set ON the parking lights will illuminate for 30-seconds
after disarming the system, or turning off the ignition. The parking lights will be switch OFF during this
time if the system is armed again or the ignition becomes ON.
2-3 LIGHT OUTPUT (PARKING LIGHTS/TURN SIGNAL): This settings control whether the parking lights or
turn signal will be used while the system is triggered or as confirmation lights.
2-4 AUTOMATIC RE-ARMING OFF/ON (60S): This settings control whether the system will re-arm if no door
was opened after 60 seconds or not. This will not include locking of the doors or arming the original security
system (if present). When set ON, the system will arm only if Lock button is pressed. This option is ignored
if the vehicle has automatic rearming feature ON from the factory.
24
© 2007 Directed Electronics—all rights reserved
Advertisement
Table of Contents
