Menu #1 - Basic Features - Directed Electronics 554A Installation Manual

times and then press it once more and HOLD it. The siren would chirp seven times to confirm
access to the seventh feature.
To select another menu:
1. Press and HOLD the integrated LED/Valet
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to
program a feature in Menu #2, you press and HOLD the integrated LED/Valet
seconds, the siren chirps twice indicating access to Menu #2.
To exit the learn routine do one of the following:
Close the open door.
Turn the ignition on.
No activity for longer than 15 seconds.
Press the integrated LED/Valet
System Features Menus
Items in bold text have been programmed to the default setting at the factory.

Menu #1 - Basic Features

Feature One Chirp
Number Setting
1-1 Active arming
1-2 Chirps ON
1-3 Ignition-controlled door locks
1-4 Active locking only
1-5 Panic with ignition ON
1-6 0.8 second door lock pulses
1-7 Forced passive arming ON
1-8 Automatic Engine Disable ON
1-9 Armed When Driving (AWD) ON
1-10 Code Hopping
© 2003
Directed Electronics, Inc.
switch.
®
switch too many times.
®
Two-Chirp
Setting
Passive arming
Chirps OFF
Standard door locks
Passive locking
No panic with ignition on
3.5 second door lock pulses
Forced passive arming OFF
Automatic Engine Disable OFF
AWD OFF
® ®
ON Code Hopping
switch. After three
®
®
OFF
25