H3C WX2540E Installation Manual page 21

Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
2. Press Ctrl + B at the prompt within 4 seconds to access the Boot menu. Otherwise, the system enters
the system image file reading and self-compressing process.
To access the Boot menu after the system enters the system image file reading and self-compressing
process, restart the device.
Starting to get the main application file-- flash:/wx2500.bin!...
............................................................
The main application file is self-decompressing.............................
............................................................................
......................................................Done!
System application is starting...
User interface con0 is available.
Press ENTER to get started.
Press Enter at the prompt, and you can configure the device when the prompt <H3C> appears.
During the startup process, the CPLD is automatically upgraded to the latest version.
: DDR3 SDRAM
: 1024MB
: 800MHz
: 896KB
: 1024MB
: 002
: Ver.B
10