Advertisement
Quick Links
K I N G S B R I D G E – F 2 5 0 5 0 E I
INSTALLATION AND OPERATING INSTRUCTIONS
5.38M
9.04M
TUBE SLIDE
2-4 Hrs
Two person
assembly
9405050E
Rev 21/03/2016
WARNING
Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - (9.30m)30' 6" x (9.04m)29'8" area requires Protective Surfacing. See page 3.
9.30M
5.64M
MAXIMUM VERTICAL FALL HEIGHT - (2.01m)6' 7"
CAPACITY - 14 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as multi-unit residences, schools, churches,
nurseries, day cares or parks.
Cedar Summit
c/o ©Solowave Design L . P .
Mount Forest, ON Canada
N0G 2L0
www . c edarsummitplay . c om
support@cedarsummitplay . c om
Customer Service
1-877-817-5682 (toll free)
1-519-323-2258
To reduce the risk of serious injury or death, you must read and
follow these instructions. Keep and refer to these instructions
often and give them to any future owner of this play set.
Table of Contents
Warnings and Safe Play Instructions . . . . . . . . . . pg . 2
Protective Surfacing Guidelines . . . . . . . . . . . . . . . pg . 3
Instructions for Proper Maintenance . . . . . . . . . pg . 4
About Our Wood – Limited Warranty . . . . . . . . . pg . 5
Keys to Assembly Success . . . . . . . . . . . . . . . . . . . . pg . 6
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg . 8-18
Step-By-Step Instructions . . . . . . . . . . . . . .pg . 19-114
Installation of I . D . / Warning Plaque . . . . . . . . pg . 115
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last Page
FORT
16-20 Hrs
Two person
assembly
Advertisement
Related Manuals for Cedar Summit KINGSBRIDGE F25050EI
Summary of Contents for Cedar Summit KINGSBRIDGE F25050EI
- Page 1 Table of Contents Cedar Summit c/o ©Solowave Design L . P . Warnings and Safe Play Instructions . . . . . . . . . . pg . 2 Mount Forest, ON Canada Protective Surfacing Guidelines .
- Page 2 Warnings and Safe Play Instructions CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using this play system.
- Page 3 Protective Surfacing - Reducing Risk of Serious Head Injury From Falls One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM F1292.
- Page 4 Instructions for Proper Maintenance Your Cedar Summit Play System is designed and constructed of quality materials with your child’s safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your play set, it is important that you, the owner, properly maintain it.
- Page 5 About Our Wood Cedar Summit Premium Play Systems uses only premium playset lumber, ensuring the safest product for your children’s use. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
- Page 6 Keys to Assembly Success Tools Required • Tape Measure • #1 Phillips, #2 Robertson • Open End Wrench • 3/16” Hex Key • Carpenter’s Level and Screwdriver (1/2” & 9/16”) • 8’ Step Ladder • Carpenter’s Square • Ratchet with extension •...
- Page 7 (9320131) (1) Crimp Rope Bag Gable Clock Assembly Swing Belt S eat (350 2000I) (3320164) ( 9320130 ) Green (1) Cedar Summit ID Plaque (9320357) 1x - Hand Grip Swing Hanger (6 Pk) Yellow (9320240) (3206106) Cedar Summit Plaque (9320358)
- Page 8 Box 1 - Hardware (Actual Size) (5) FW0 - 3/16" (5mm) Flat Washer - (51103100) (32) TN1 - 1/4" (6mm) T - Nut -(54503200) (5) LW2 - 5/16" (8mm) Lock Washer (51303300) (40) FW1 -1/4" (6mm) Flat Washer - (51103200) (38) LW1 - 1/4"...
- Page 9 Box 1 - Hardware (Actual Size) (16) WL5 - Wafer Lag 1/4 x 2-1/2" (6 x 64mm) - (52613222) (2) WL3 - Wafer Lag 1/4 x 1-3/8" (6 x 35mm) - (52613216) (2) LS3 - Lag Screw 1/4 x 3" (6 x 76mm) - (52213230) (2) WB1 - Wafer Bolt w/ Nylok 5/16 x 1"...
- Page 10 Box 2 - Part Identification (3) 2781 - 1 x 6 x 19" (16 x 137 x 483mm) RK Board B (1) 2648 - 1 x 4 x 40-5/8" (16 x 86 x 1032mm) Floor Board 3632781 3632648 2609 - 1 x 5 x 40-5/8" (16 x 114 x 1032mm) Floor Board (2) 2607 - 1-1/4 x 3 x 22"...
- Page 11 Box 2 - Hardware Identification (Actual Size) (2) LW2 - 5/16" (8mm) Lock Washer - (51303300) (36) TN1 - 1/4" (6mm) T - Nut - (54503200) (5) FW0 - 3/16" (5mm) Flat Washer - (51103100) (41) LW1 - 1/4" (6mm) Lock Washer - (51303200) (44) FW1 - 1/4"...
- Page 12 Add on "H" Hardware Identification (Actual Size) BOX 2 - 1/4 x 1-3/8" 2pc. WL3 - Wafer Lag (6 x 35mm) - (52613216) Wafer Bolt w/ Nylok 5/16 x 1" (8 x 25mm) 2pc. WB1 - - (53613310) Screw 1/4 x 3" 2pc.
- Page 13 Box 3 & 4 - Part Identification (4) 2759 Roof End 1-1/4 x 3 x 10" (32 x 76 x 254mm) (2) 9082 MOD Sunburst Bottom 1 x 4 x 30" (16 x 86 x 762mm) 3632759 3639082 (4) 2760 - Roof Support 1¼ x 2¼ x 37½" (32 x 57 x 953mm) (1) 8073 Dormer Bottom 1 x 2 x 22"...
- Page 14 Box 5 - Part Identification 1pc. - 2757 1pc. - 2648 - 1 x 4 x 40-5/8" (16 x 86 x 1032mm )- Floor Board 3632648 LT Post Assembly 1¼ x 2½ x 87" (32 x 64 x 2210mm ) 8pc.
- Page 15 Box 6 - Part Identification (2) 9089 Upper Tunnel Insert 1.27 x 8-1/4 x 18-51/64" (32 x 210 x 477mm) 37639089 (2) 9088 Tunnel Side Joist 1-1/4 x 3 x 36" (32 x 76 x 914mm) - 3639088 (7) 9092 Floor Board 1 x 5 x 16-7/8" (16 x 114 x 429mm) 3639092 (1) 9087 Floor Board 1 x 4 x 16-7/8"...
- Page 16 TNR3 Identification (Reduced Part Size) (1) Lower SL Insert 1.36 x 8-1/8 x 26¼" (1) SL Gusset 1¼ x 3 x 15¾" (32 x 76 x 400mm) (34 x 206 x 667mm) 8934 3638934 37638935 (1) TNR Upright 1¼ x 3 x 20¼" (32 x 76 x 514mm) 8935 8965 3638965...
- Page 17 Part Identification (Reduced Part Size) 9x - TNR 2 Slide Elbow (3310121) 1x - TNR 2 Slide Exit Top (3310124) 1x - TNR3 Short Exit (3310132) 1x - TNR 3 Tube Support (9203601) 10x - TNR 2 Slide Clamp Ring (3300120) (1) Rebar Ground Stake 9290318...
- Page 18 • The carton I.D. stamp is located on the end of each carton. The tracking number is located on the Cedar Summit ID Plaque (9320357). • Please retain this information for future reference. You will need this information if you contact the Consumer Relations Department.
- Page 19 Step 1: Side Wall Prep Part 1 It is important to assemble the frame on a flat, smooth surface. A: Place (2771) End Post and (2770) End Post Left side by side with the grooves facing up and in. Put (2770) End Post Left on the right hand side.
- Page 20 Step 1: Side Wall Prep Part 2 It is important to assemble the frame on a flat, smooth surface. D: Turn the assembly over, place (2774) Upright in the middle grooves of (2775) Panel Cross Support and (2772) Panel Floor Support then attach all boards with 8 (H9) Hex Bolts (with lock washer and flat washer) connecting to the previously installed t-nuts.