CTA PAD-PARAFDC Instruction Manual

Premium Locking Floor Stand Kiosk w/
Digital Password Combination Security Enclosure
CONTENTS:
A
x1

INSTALLATION:

1. Assembling floorstand base :

A
B
1A. Allign the holes on the sntad (A) with holes on the base (B) and turn
in screws (F) with provided allen tool (K) until securely tightened. Shown
above.

3. Attaching enclosure to VESA plate :

J
C
D
x4
M5 x 10
3A. Align enclosure (C) VESA holes to VESA plate holes in stand (A) and
from the front of enclosure turn in screws (D) into the threaded VESA
holes with provided allen tool (J) until securely thigtened. Shown above.
PAD-PARAFDC
INSTRUCTION - MANUAL
C D
x4
x1
M5 x 10
H
B
x1
K
F
M6 x4
A
E
x4
M5 Nut
I
x1
x1

2. Cable routing :

4. Setting up the foam adapters :

4A. Identify the double sided adhesives (G). Peel away the backing on
both sides. Adhesive four of them behind the foam pieces (I) as
illustrated. They are to adhese the foam to the enclosure. Peel away
the back on the next four and place them on top of the foam pieces as
illustrated. These are to attach the foam to the tablets and ensure
security.
888-733-4448
F G
x4
M6
J K
x1
M6 Allen Key
M5 Allen Key
2A. To route a charge cable
through the stand, attach the
weighted pendant
charge cable, then pass through
the cutout at the top of the
stand.
2B. When the cable reaches the
bottom of the stand, pull through
the hole at the stand back and
remove the weighted pendant
as shown.
G
I
x1
x1
to your