CTA PAD-PARAFP Instruction Manual

Premium Locking Floor Stand Kiosk
with Enclosed Printer Storage & Cable Management
CONTENTS:
A C
x2
INSTALLATION:
1. Assembling base
A
E
B
1A. Combine both halves of the base (B) as shown above. Take (1) unit of
the body (A) and align the mounting holes. Rotate in (4) screws (E) with
provided allen key until securely tightened.
2. Attaching Base Pads
B
2A. Flip over the now combined base section. Find the base pads (H) and
peel off the sticker to expose the adhesive. Place the foam pads (adhesive
face down on base) at the corners and give it a firm press for a few
seconds until it's securely attached.
PAD-PARAFP
INSTRUCTION - MANUAL
B
x2
x1
F
x2
M6 anchor
G
H
I
D
x6
G E
x12
x1
M5 x 6
M5 Allen Key
3. Assembling Body Segments
C
A
A
3A. Find the other body unit (A) and the printer shelf unit (C). First unlock the
compartments using the keys (I).Then align holes between two body units at
a time. Take (4) screws (E) and using the provided allen key tool (G), rotate
in the screws as shown until securely tightened. Each body segment has it's
own unique key set. Identify which keys go with each segments. Each key
set is specific to a segment.
888-733-4448
H
x4
x4
J
x4
M5 x 12
I
E
I
(4)
G
I