CTA PAD-PARAFPE Instruction Manual

for Convertible Printer Shelf Floor Stand
CONTENTS:
A C
x2

INSTALLATION:

1. Assembling base

A
E
B
1A. Combine both halves of the base (B) as shown above. Take (1) unit of
the body (A) and align the mounting holes. Rotate in (4) screws (E) with
provided allen key until securely tightened.

2. Attaching Base Pads

B
2A. Flip over the now combined base section. Find the base pads (H) and
peel off the sticker to expose the adhesive. Place the foam pads (adhesive
face down on base) at the corners and give it a firm press for a few
seconds until it's securely attached.
Base Component
PAD-PARAFPE
INSTRUCTION - MANUAL
B I
x2
x1
F
x2
M6 anchor
M5 Allen Key
G
H
D
x4
x6
x1
G
E
x1
x12
M5 x 6

3. Assembling Body Segments

B
A
A
3A. Find the other body unit (A) and the printer shelf component. First
unlock the compartments using the keys (I).Then align holes between
two body units at a time. Take (4) screws (E) and using the provided
allen key tool (G), rotate in the screws as shown until securely tightened.
888-733-4448
J
K
Foam Adapter & Sheet Bundle
x1
M H
x4
x4
M5 x 12
I
I
I
N
x2
E
(4)
G