Advertisement
Quick Links
Workstation with Universal Security Enclosure
CONTENTS:
2. SETTING UP GRAPHIC CARD SLOT
SLIDE OUT THE (2) GRAPHIC CARD PANELS IN THE FRONT AND BACK. IF THERE IS A STICKER FILM, REMOVE THAT FIRST. IF
YOU HAVE PRINTED OUT A STICKER GRAPHIC, PLACE IT ONTO THE PANEL. IF YOU ARE USING A COMPLETE NEW PANEL, YOU
CAN REPLACE THE INITIAL PANELS THAT CAME WITH THE FLOOR STAND. PLACE ONE PANEL BACK FIRST.
Premium Floor Stand
PAD-PARAF1GT
INSTRUCTION - MANUAL
1. INSTALLING BASE:
ALIGN BASE PLATE WITH THE BODY AND
SCREW IN FROM THE BOTTOM USING THE PROVIDED
ALLEN KEY TOOL AND LARGER FLATHEAD SCREWS.
888-733-4448
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-PARAF1GT
Summary of Contents for CTA PAD-PARAF1GT
- Page 1 Premium Floor Stand Workstation with Universal Security Enclosure PAD-PARAF1GT INSTRUCTION - MANUAL 1. INSTALLING BASE: CONTENTS: ALIGN BASE PLATE WITH THE BODY AND SCREW IN FROM THE BOTTOM USING THE PROVIDED ALLEN KEY TOOL AND LARGER FLATHEAD SCREWS. 2. SETTING UP GRAPHIC CARD SLOT SLIDE OUT THE (2) GRAPHIC CARD PANELS IN THE FRONT AND BACK.
- Page 2 3. SETTING UP CABLE ROUTING WITH ONLY (1) PANEL BACK IN, SLIDE IN THE POWER CORDS AND ANY OTHER CORDS THAT WOULD NEED TO BE CONNECTED TO THE TABLET THROUGH THE BODY AS SHOWN. THERE WILL BE GAPS AT THE TOP AND BOTTOM FOR THEM TO ROUTE OUT TO THE POWER SOURCE AND TO THE DEVICE. SLIDE IN SECOND PANEL WHEN ROUTING IS FINISHED.
Need help?
Do you have a question about the PAD-PARAF1GT and is the answer not in the manual?
Questions and answers