Advertisement
Customizable Premium Locking Floor Stand Kiosk
with Graphic Card Slot for Branding
CONTENTS:
2. SETTING UP GRAPHIC CARD SLOT
SLIDE OUT THE (2) GRAPHIC CARD PANELS IN THE FRONT AND BACK. IF THERE IS A STICKER FILM, REMOVE THAT FIRST. IF
YOU HAVE PRINTED OUT A STICKER GRAPHIC, PLACE IT ONTO THE PANEL. IF YOU ARE USING A COMPLETE NEW PANEL, YOU
CAN REPLACE THE INITIAL PANELS THAT CAME WITH THE FLOOR STAND. PLACE ONE PANEL BACK FIRST.
PAD-PARAF1/ PAD-PARAF1W
INSTRUCTION - MANUAL
1. INSTALLING BASE:
ALIGN BASE PLATE WITH THE BODY AND
SCREW IN FROM THE BOTTOM USING THE PROVIDED
ALLEN KEY TOOL AND RELATED HARDWARE NEEDED.
888-733-4448
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-PARAF1
Summary of Contents for CTA PAD-PARAF1
- Page 1 Customizable Premium Locking Floor Stand Kiosk with Graphic Card Slot for Branding PAD-PARAF1/ PAD-PARAF1W INSTRUCTION - MANUAL 1. INSTALLING BASE: CONTENTS: ALIGN BASE PLATE WITH THE BODY AND SCREW IN FROM THE BOTTOM USING THE PROVIDED ALLEN KEY TOOL AND RELATED HARDWARE NEEDED.
- Page 2 3. SETTING UP CABLE ROUTING 4. ATTACH VESA PLATE ATTACH VESA PLATE AT TOP. ROUTE ANY WIRES THROUGH THE PLATE’S OPENINGS AND PLACE IN SCREWS FROM THE TOP IN THE SCREW HOLES AS SHOWN. WITH ONLY (1) PANEL BACK IN, SLIDE IN THE POWER CORDS AND ANY OTHER CORDS THAT WOULD NEED TO BE CONNECTED TO THE TABLET THROUGH THE BODY AS SHOWN.
Need help?
Do you have a question about the PAD-PARAF1 and is the answer not in the manual?
Questions and answers