Advertisement

6300 Wide Device 6C03 – Cylinder Only
Installation Instruction
5/16"

2. SHORTEN SCREWS

 Locate screws included with Rim Cylinder /
Housing
 Shorten at appropriate machined break-off
length for door thickness
Phone: 833-2-PDQTEC | www.pdqlocks.com

1. SIZE CYLINDER TAILPIECE

 Cut cylinder/housing tailpiece to extend
5/16" past inside door face when
installed.

3. ATTACH CYLINDER TO DOOR

 Attach cylinder to door with mounting plate
as shown. Be careful not to over tighten
mounting plate screws.
 Continue exit device installation as shown in
device instruction.
1
Cylinder Oriented
Vertically
639420 Rev0 – 06/13/22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PDQ 6300

  • Page 1 6300 Wide Device 6C03 – Cylinder Only Installation Instruction Phone: 833-2-PDQTEC | www.pdqlocks.com 1. SIZE CYLINDER TAILPIECE  Cut cylinder/housing tailpiece to extend 5/16" past inside door face when 5/16" installed. 2. SHORTEN SCREWS  Locate screws included with Rim Cylinder / Housing ...
  • Page 2 6400 Narrow Device 6C03 – Cylinder Only Installation Instruction Phone: 833-2-PDQTEC | www.pdqlocks.com 1. SIZE CYLINDER TAILPIECE  Cut cylinder/housing tailpiece to extend 5/16" past inside door face when 5/16" installed. 2. SHORTEN SCREWS  Locate screws included with Rim Cylinder / Housing ...

This manual is also suitable for:

64006c03

Table of Contents