Advertisement
Quick Links
6300/6400R/RF EXIT INSTALLATION INSTRUCTION
RIM DEVICE
2. SIZE DEVICE
Standard lengths are for 36" or 48" door.
Device must be cut for other lengths.
Mark length with tape – length equals
device size minus desired door size (for
30" door = cut 6" off 36" device) ensuring
a square cut.
40" To Finished Floor
Reinforced Steel
or Aluminum Door
Solid Wood Door Drill 1/8" Pilot Hole for #10 Wood Screw
All Others
Phone: 833-2-PDQTEC | www.pdqlocks.com
1. PREPARE DOOR
Prepare door and frame according to
template.
Refer to trim template if installing trim.
Maximum cut off length:
Panic Fire Alarm MLR
36" Device
6"
48" Device
12"
3. INSTALL DEVICE
Install device and trim with 1/4-20 screws
from pack #639043.
Device can be surface mounted to the
door, optional sex nuts are available,
device is through bolted if using trim.
Mounting Options:
Surface Mount: Drill/Tap push side for 1/4-20
Use optional Sex Bolts. Drill push side with
9/32" drill bit. Drill pull side with 3/8" drill bit.
1
8"
2"
3"
14"
8"
9"
639400 Rev0 – 12/12/21
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PDQ 6300
Summary of Contents for PDQ 6300
- Page 1 6300/6400R/RF EXIT INSTALLATION INSTRUCTION RIM DEVICE Phone: 833-2-PDQTEC | www.pdqlocks.com 1. PREPARE DOOR Prepare door and frame according to template. Refer to trim template if installing trim. 40" To Finished Floor 2. SIZE DEVICE Standard lengths are for 36" or 48" door.
- Page 2 6300/6400R/RF EXIT INSTALLATION INSTRUCTION RIM DEVICE 4. INSTALL END CAP Slide end cap into rail. Ensure rail is level. Mark the centers of the slots. Remove end cap then drill holes using the chart from Step 3. Reinstall end cap and fasten with screws.
Need help?
Do you have a question about the 6300 and is the answer not in the manual?
Questions and answers