Advertisement
Quick Links
SDS pdqSMART INSTALLATION INSTRUCTION
CYLINDRICAL LOCK
LH/LHR
2. PREPARE DOOR &
INSTALL LATCH
Prepare door according to template.
Install latch, radius toward door frame
Secure with (2) #8 x ¾" combo screws.
4. INSTALL INSIDE
MOUNTING PLATE
Install inside mounting plate and
secure with (2) #10-32 x 1-7/16" flat
head screws.
1. CHECK HANDING OF LOCK
If handing of lock is not correct for opening, see next
RH/RHR
READER
WIRE
CHASSIS
WIRE
page for handing instructions.
3. INSTALL OUTSIDE TRIM /
CHASSIS ASSEMBLY
Install escutcheon/chassis assembly from
outside of door – feeding wires through
chassis hole in door.
Phone: 866-874-3662 | www.pdqlocks.com
88328 Rev2 – 7/22/20
Advertisement
Related Manuals for PDQ pdqSMART SDS
Summary of Contents for PDQ pdqSMART SDS
- Page 1 SDS pdqSMART INSTALLATION INSTRUCTION CYLINDRICAL LOCK Phone: 866-874-3662 | www.pdqlocks.com 1. CHECK HANDING OF LOCK If handing of lock is not correct for opening, see next page for handing instructions. LH/LHR RH/RHR 2. PREPARE DOOR & INSTALL LATCH Prepare door according to template. ...
- Page 2 SDS pdqSMART INSTALLATION INSTRUCTION BATTERY COVER 5. CONNECT READER AND INSTALL INSIDE TRIM INSIDE LEVER Plug reader wire and chassis wire into sockets on control board on back of escutcheon, install escutcheon onto door. Be careful not to pinch wires. LEVER RING ...
Need help?
Do you have a question about the pdqSMART SDS and is the answer not in the manual?
Questions and answers