Table of Contents Reset the Lock .............. Change Master Code .............. Add User Codes .............. Delete User Codes .............. Silent Mode .............. Auto Lock .............. Set Auto Lock Time Delay .............. Add One-Time Code .............. Vacation Mode ..............
RESETTING THE LOCK Press the “reset button” for 8 seconds until the green light flashes. ** This will delete ALL user codes that are associated with the lock**...
CHANGING THE MASTER CODE Master Code (4-8 Digits) (After resetting, default master code is 12345678) Press 1 New Master Code New Master Code (Successful when green light flashes)
ADDING USER CODES Master Code (4-8 Digits) Press 2 New User Code (4-8 Digits) New User Code (Successful when green light flashes) Notes: • User Codes cannot be redundant or sequential • Avoid creating codes that are close to the master code...
VACATION MODE Master Code (4-8 Digits) Press 8 Vacation mode enabled when green light flashes (When vacation mode is on, only the master code can be used to unlock the door. This mode will automatically be disabled after unlocking.)
Need help?
Do you have a question about the SDE and is the answer not in the manual?
Questions and answers