Adjusting Leveling Feet - Oki LP-1040 Installation Manual

3.4.2

Adjusting leveling feet

Adjust the height of the four leveling feet with the procedure below.
1
2
Chapter 3 Receive the shipment and set up the Printer in the final position
Turn the nuts to lower the four adjustable
leveling feet until the four casters are about 1
mm off the floor.
If the floor is carpeted, adjust to a height so
the casters can just barely be turned by hand.
Caution
Do not lift the printer unless absolutely necessary.
After adjusting all four positions, tighten each
nut to secure the adjustable leveling feet.
3-11
OKI Data Infotech Corporation CONFIDENTIAL