Appendix C Frequently Asked Questions (Faq - Oki LP-1040 Installation Manual

Appendix C Frequently asked questions (FAQ)

Printer
Q
How long is the warm-up time?
How can I shorten the warm-up time?
How do I stop the output of large amounts of
unnecessary data?
How do I change the output order?
Can the buzzer continue to sound when an
error occurs at the Printer?
How can I change tne settings of the IP
address, subnet mask, and gateway address?
How do I manually output the accounting FAX
form?
Can I add a time stamp?
Paper
Q
What paper types are supported?
What paper thickness and basis weights are
supported?
Can the roll paper of previous products be
used?
Are paper flanges compatible?
OKI Data Infotech Corporation CONFIDENTIAL
A
Within 240 seconds.
This is not possible.
Use the web functions.
Use the WEB functions or the print job screen on
the operation panel.
This is not possible.
Browse to Menu, System, Communication
Parameters, and then Network Settings.
Browse to Menu, Function, and then Print For
Fax Transmission.
Browse to Menu, PDL Settings, Port n-XXXX,
and then Stamp Settings.
A
Types:
(1) Plain paper
(2) Recycled paper
(3) Tracing paper 60
(4) Tracing paper 75
(5) Film (matte film)
(1) 67 g (2.36oz)/ m
inches) thickness
(2) 66 g (2.33oz)/ m
inches) thickness
(3) 61 g (2.12oz)/ m
inches) thickness
(4) 75 g (2.65oz)/ m
inches) thickness
(5) 121.5 g (4.29oz)/ m
inches) thickness
Yes
The paper flanges of the following products are
compatible.
- LP-1010/20 (1 roll model)
- LP-1020/20 (2 roll model)
- LP-2050/1030
- LP-2060
C-1
2
with 87 μm (0.003425
2
with 93 μm (0.003661
2
with 61 μm (0.002402
2
with 70 μm (0.002756
2
with 90 μm (0.003543