Chinstrap With Micro-Lock Ratchet Fastener - SCHUBERTH E2 Manual

C. THE HELMET
CLOSING THE CHIN BAR
To close the chin bar, pivot it down with
one hand until both locks audibly engage.
Note:
Each time you close the chin bar, check that the locks have engaged
properly by pressing the chin bar upwards.
Tip:
When using the additional wind deflector, locking the chin bar is easier if
you grip the chin pad underneath with a finger of your other hand to help
you ease the chin bar over your chin.
Caution:
When driving with the open chin bar, it must be locked. It is not permitted
to drive with the chin bar only swiveled up.
9. CHINSTRAP WITH MICRO-LOCK RATCHET FASTENERS
The E2 is fitted with a ratchet strap. This locking
system is easy to use and enables you to adjust the
chinstrap perfectly to your head every time you put the
helmet on.
ADJUSTING THE CHINSTRAP
The length of the chinstrap is adjusted by increasing or reducing the length of
strap pulled through the metal buckles. Adjust the length of the chinstrap so
that it fits firmly but comfortably under your chin.
66