SCHUBERTH E2 Manual page 82

C. THE HELMET
2. Loosen all 4 pins of the upper head pad as well as
the 2 pins of of the left and right side pads.
3. For the side pads, also loosen the velcro
connection to the cheek pads.
4. Loosen the 2 pins of the back pad. Attention, here you must additionally
loosen the back pin of the cheek pad.
INSTALLATION INNER LINING
Installation the head pad
1. Connect the 4 pins of the head pad with the
corresponding plug-in devices.
2. Connect the 2 pins of the side pad with the
corresponding plug-in devices. Please note
the marking of the right and left side pad.
82