Table of Contents
Advertisement
2 Overview
2.1
Product Introduction
Manual Metal Arc welding is the process
of joining metals where an electric arc is
struck between the metal to be welded
(workpiece) and a flux-coated filler wire
(the electrode). The heat of the arc melts
the parent metal and the electrode which
mix together to form, on cooling, a
continuous solid mass.
The welding power source can offer stronger, more concentrated and more stable arc.
When stick and work piece get short, its response will be quicker. It means that it is
easier to design into welding machine with different dynamic characteristics, and it
even can be adjusted for specialty to make arc softer or harder.
MMA welding machine has the following characteristics: effective, power saving,
compact, stable arc, good welding pool, high no-load voltage, and good capacity of
force compensation. It can weld stainless steel, alloy steel, carbon steel, copper and
other color metal. It can apply to
including acidity,
and outside decoration. Compared with the same products of home and abroad, it is
compact in volume, light in weight, easy to install and operate.
Thanks for purchasing our product and hope for your precious advice. We will dedicate
to
producing
the best products and
6
electrodes
and
alkalescence. It can apply in high altitude, the open air and inside
of different specifications and materials,
offering
the best service.
Advertisement
Table of Contents
