Environment And Problems; Environment - Jasic ARC 160GS User Manual

6 Environment and Problems

6.1

Environment

Note: The power source should not be used in rain or snow environment.
The recommended external environment for welding is as follows:
 Please place the power source in a horizontal position. The inclination of the power
source shall not exceed 10°.
 The environment where the equipment is stored should be clean and protected by
sand and dust.
 Dust, acids, corrosive gases or substances in the surrounding air do not exceed
normal levels, except those produced by the welding process.
 The environment where the equipment is stored needs to be dry. The air relative
humidity requirements are as follows:
No more than 50% at 40℃.
No more than 90% at 20℃.
 The environment where the equipment is placed should not be surrounded by heat,
fire and welding spatter. The ambient temperature requirements are as follows:
During welding: -10℃ ~ +40℃.
During transportation and storage: -20℃ ~ +55℃.
11