Jasic TIG 200P Operator's Manual
Dc pulse tig / mma welding - dual voltage
Hide thumbs
Also See for TIG 200P:
- Manual (59 pages) ,
- Operator's manual (20 pages) ,
- Instruction manual (12 pages)
Related Manuals for Jasic TIG 200P
Summary of Contents for Jasic TIG 200P
- Page 1 TIG 200P DC Pulse TIG / MMA Welding - Dual voltage Order code JT-200PDV OPERATOR MANUAL...
- Page 2 Your new product Thank you for selecting this Jasic Technology, Wilkinson Star product. This product manual has been designed to ensure that you get the most from your new product. Please ensure that you are fully conversant with the information provided paying particular attention to the safety precautions. The information will help protect yourself and others against the potential hazards that you may come across.
-
Page 3: Safety Precautions
Safety Precautions These general safety norms cover both arc welding Insulate yourself from work and ground using dry insulating mats or covers big enough to prevent any physical contact machines and plasma cutting machines unless with the work ground. otherwise noted. Never touch the electrode if you are in contact with the work The equipment must only be used for the purpose it was ground, or another electrode from a different machine. - Page 4 Do not weld on coated metals, unless the coating is Replace the coverings and protections and close all doors removed from the weld area, the area is well ventilated, and when the intervention is finished, and before starting the while wearing an air-supplied respirator. The coatings on equipment.
- Page 5 Keep your head and face away from the cylinder valve outlet RF Declaration when opening the cylinder valve. Equipment that complies with directive 2004/108/EC Always secure the cylinder safely concerning electromagnetic compatibility (EMC) and the technical requirements of EN60974-10 is designed for use in Never deface or alter any cylinder industrial buildings and not those for domestic use where electricity is provided via the low voltage public distribution...
-
Page 6: Product Overview
Product Overview The unique electronic structure and air channel design in this series of machines provides efficient cooling of the power devices as well as improving the duty cycles of the machines. The design of the forced air-cooling system channel can effectively prevent the power devices and control circuits from being damaged by the dust introduced into the machine by the fan. -
Page 7: Technical Data
Technical data Technical Parameter Technical Parameter Unit Model Model Model Model TIG180P (JT-180PDV) TIG180P (JT-180PDV) TIG200P (JT-200PDV) TIG200P (JT-200PDV) AC115V±15%; AC230V±15%; AC115V±15%; AC230V±15%; Rated input voltage Rated input voltage 50/60HZ 50/60HZ 50/60HZ 50/60HZ Rated Rated input input power power 19~90 10~150 10~100 10~180... - Page 8 Controls Front view Operating panel: To set the parameters. “+” output terminal “-” output terminal Control terminal: To connect the signal wire of the TIG torch trigger. Gas terminal: To connect the gas hose of the TIG torch. Handle Rear view Power switch: Power ON/OFF switch.
- Page 9 Indicator for pulsed TIG Indicator for DC TIG Indicator for MMA Indicator for 2T 10. Indicator for 4T Indicator for spot welding 12. Indicator for base current 13. Indicator for welding current 14. Indicator for upslope 15. Indicator for initial current 16.
- Page 10 Parameter autosaving The parameters having been adjusted will be autosaved in the parameter group currently used (no autosaving will be done in the case that no operation is done after parameters are adjusted and the machine was turned off in 5s’ time). When the machine is turned on next time, the parameters in each parameter group are the parameters used during the last operation.
-
Page 11: Installation
Installation Unpacking Insert the cable plug of the work return lead into the “-” socket on the front panel of the welding machine, and Check the packaging for any signs of damage. tighten it clockwise Carefully remove the machine and retain the packaging until the installation is complete. -
Page 12: Operation
Operation Select the TIG operating mode (2T, 4T or Before starting any welding activity ensure that you have Spot) using the selector switch. suitable eye protection and protective clothing. Also take the necessary steps to protect any persons within the area. - Page 13 Press the torch trigger, gas valve opens, and HF arc ignition starts; Keep the torch 2~4mm away from the work piece to ignite the arc. When the arc is ignited the HF stops, and current rises to the preset value. Welding begins, and it ends when the preset spot welding time is reached.
-
Page 14: Control Keys
Control keys Select the upslope time Standard TIG Mode setting function by pressing t h e w e l d i n g p a r a m e t e r Select the pre-flow time selecting key, and set the setting function by pressing upslope time. -
Page 15: Maintenance And Troubleshooting
Maintenance and troubleshooting The following operation requires sufficient professional Troubleshooting knowledge on electric aspects and comprehensive Before arc welding machines are dispatched from the factory, they have already been checked thoroughly. The safety knowledge. Make sure the input cable of the machine should not be tampered with or altered. -
Page 16: Electrical Schematic
Electrical schematic... -
Page 17: Parts List
Parts list... - Page 18 Part no Description Part no Description 10004949 Power switch 10006282 IRF9Z24N 10041432 Power line 10006282 IRFZ24N 10042342 Connector for input gas 10037135 Driver transformer 10044009 TIG200P Dual voltage fan 10041436 Thermal switch Switching mode power supply 10043460 Back Panel 10037134 transformer 10043476 Handle...
- Page 19 JT-200 DC Pulsed TIG Series DC TIG/MMA WELDING MACHINE Order code ! JT-200PDV (TIG 200PDV) © Wilkinson Star Limited Issue 2 March 2014 Product is subject to change without notice xviii...