Table of Contents
Advertisement
EVK-M101, EVK-M101C - User guide
Figure 9: EVK-M101/C communication ports identification on Windows
8.1.1 UART baud rate configuration
The baud rate for the UART communication to the receiver can be configured in the CFG-UART1-
BAUDRATE configuration key or in the CFG-UART2-BAUDRATE configuration key depending on the
UART interface that is in use. The default baud rate is set to 38400 as shown in
Figure
10, and the
maximum baud rate is 921600.
UBX-21003949 - R04
8 Device configuration
Page 19 of 30
C1-Public
Advertisement
Table of Contents
