Specifications; Safety Precautions; Approvals - Ublox EVK-M101 User Manual

2 Specifications
Parameter
Serial interfaces
Timing interfaces
Dimensions
Power supply
Normal operating temperature
Table 2: EVK-M101/C specifications

2.1 Safety precautions

EVK-M101/C must be supplied by a PS1 class limited power source. See section 6.2.2.4 of IEC
62368-1:2018 [4] for more information on the PS1 class.
In addition to a limited power source, only ES1 class circuits are to be connected to the EVK-M101/C,
including interfaces and antennas. See section 5.2.1.1 of IEC 62368-1:2018 [4] for more information
on the ES1 class.

2.2 Approvals

The EVK-M101/C is designed for the presumption of conformity with the essential requirements
and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU.
The EVK-M101/C complies with the Directive 2011/65/EU (EU RoHS 2) and its amendment Directive
(EU) 2015/863 (EU RoHS 3).
The Declaration of Conformity (DoC) is available at
Resources > Conformity Declaration.
UBX-21003949 - R04
C1-Public
Specification
1 USB 2.0 Type-C
1 UART, max baud rate 921600 baud
RS-232 +/- 5.0 V level
14 pin, 3.3 V logic
1 I2C, max 400 kHz
1 SPI, max SPI CLK 5.5 MHz
1 time pulse output
105 x 64 x 26 mm
5.0 V via USB or powered via external power supply pin 14
(5V_IN) and pin 1 (GND)
-40 °C to +65 °C
2 Specifications
EVK-M101, EVK-M101C - User guide
u-blox website within Support > Product
Page 6 of 30