Page 1
INSTALLATION /OWNER’S MANUAL CUBE-2025WM INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE. CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE. CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product. Contents IMPORTANT INSTRUCTIONS ............................
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use.
FCC CAUTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly.
CUBE-2025WM Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1500W Max electric room appliances in the United NO HEATER States and Canada. If you need...
INSTALLATION WALL-MOUNT MOUNT NOTE: Due to the many different materials used on different walls, it is highly recommended NOTE: Due to the many different materials used on different walls, it is highly recommended NOTE: Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance.
INSTALLATION CUBE-BASE-LEGS LEGS 1. Screw the base legs to the steel Screw the base legs to the steel panel. 3. Place the unit onto the base leg the unit onto the base leg and screw in the adjustable feet, fixing the unit and in the adjustable feet, fixing the unit and the base leg.
INSTALLATION CUBE-BASE-SPEAKER 1. Unscrew the adjustable feet from the unit. 3. Place the unit on the CUBE-BASE-SPEAKER and screw in the adjustable feet, fixing the unit and the speaker box. 4. Plug into the back of the unit. Re-install 2. Unscrew the rear screws and remove the the back steel panel.
INSTALLATION OUTDOOR The Cube ( Cube 2025WM) is suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance.
HARDWIRE INSTALLATION Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified technician should service and repair this electric appliance.
MEDIA OPTIONS STEP 3: Remove the front glass panel to The media that come with this appliance are decorate your fireplace. Pour the decorative Birch Log Set, “Clear glass”, Amber glass, one (1) media into the tray. Feel free to use any bag of Black Vermiculite and one (1) bag of combination of fire glass media that you find White Vermiculite.
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION 1.
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter.
Page 15
third time to turn on the AUTO mode, press to set the temperature to switch temperature unit between Celsius and Fahrenheit. Press this button to adjust the speed of the flame. There are 3 options: High- Medium- Low. Press this button to turn on and off the ember bed light. When in ON position, the display screen of the remote control shows AD 1, when the number “1”...
Page 16
When the 7 day timer’s set, the icon will be displayed on the LCD screen of the remote control. Press again to cancel the 7 da y timer and the icon will disappears. NOTE: If the 7 day timing and the general timing are set at the same time, the system will respond to an earlier shutdown time.
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION 1.
Page 18
FIG.4 3. Press (flame button) on the touch panel of the fireplace for more than 5 seconds when the fireplace in standby mode. There will be 2 beeps come out from the fireplace and the (flame button) will flash as well indicating that Wi-fi is in EZ mode. Then please confirm to go next.
Page 19
6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi. FIG.7...
R E P L A C E M E N T P A R T S R e f e r e n c e N o . D e s c r i p t i o n Q u a n t i t y W M - B I - 2 4 2 8 V L R - B G - W i F i T o p P a n e l B a c k T o p P a n e l...
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out. Inspect the LED’s and replace them if necessary. Back black cloth is falling off Change a flicker and back black cloth. and rolled up in the flicker. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and...
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:...
Amantii warrants such products to be free from defects in material and workmanship for a period of two (2) years from the date of the first purchase of such products. The limited two (2) year warranty period for products also applies to any implied warranties that may exist under applicable law. Some...
Need help?
Do you have a question about the CUBE-2025WM and is the answer not in the manual?
Questions and answers