Summary of Contents for Amantii CUBE-2025WM-LUMINA
Page 1
THE APPLIANCE. WARNING: This product can expose you to chemicals including lead in the wiring, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information visit: www.p65warnings.ca.gov www.amantii.com ELECTRIC FIREPLACES...
TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product. Contents IMPORTANT INSTRUCTIONS ............................
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use.
FCC CAUTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly.
CUBE-2025WM-LUMINA This appliance been tested Description ELECTRIC FIREPLACE accordance with the UL Standard 2021 for Voltage 120V AC 60Hz fixed and location dedicated electric room Watts 1500W Max appliances in the United States and Canada. NO HEATER If you need assistance during installation, MOTOR HEATER please contact your local dealer.
INSTALLATION WALL-MOUNT MOUNT NOTE: Due to the many different materials used on different walls, it is highly recommended NOTE: Due to the many different materials used on different walls, it is highly recommended NOTE: Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance.
INSTALLATION CUBE-BASE-LEGS LEGS 1. Screw the base legs to the steel Screw the base legs to the steel panel. 3. Place the unit onto the base leg the unit onto the base leg and screw in the adjustable feet, fixing the unit and in the adjustable feet, fixing the unit and the base leg.
INSTALLATION CUBE-BASE-SPEAKER 1. Unscrew the adjustable feet from the unit. 3. Place the unit on the CUBE-BASE-SPEAKER and screw in the adjustable feet, fixing the unit and the speaker box. 4. Plug into the back of the unit. Re-install 2. Unscrew the rear screws and remove the the back steel panel.
INSTALLATION OUTDOOR CUBE electric fireplaces are suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance.
HARDWIRE INSTALLATION Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completely and let cool before servicing. Only a qualified technician should service and repair this electric appliance.
MEDIA OPTIONS STEP 3: Remove the front glass panel to The media that come with this appliance are decorate your fireplace. Pour the decorative DESIGN-MEDIA-OAK-12PCE-LG log set, Clear media into the tray. Feel free to use any glass, Amber glass, one (1) bag of Black combination of fire glass media that you find Vermiculite and one (1) bag of White Vermiculite.
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION Press to turn on and off the fireplace.
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter.
Page 15
AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with keys. You can switch temperature between Celsius and Fahrenheit with keys.When it is on Auto mode,fireplace operate at 1500W. Press this button to adjust the speed of the flame.
Page 16
shutdown time’s set, “AUTO” will be displayed on the LCD screen of the remote control and the digital of temperature flashes. At this time, you can set the . Now, you have finished setting of this function. temperature by When the 7 day timer’s set, the icon will be displayed on the LCD screen of the remote control.
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION NOTE: Make sure the Bluetooth of your phone is turned on during the following steps.
Page 18
FIG.4 3. Press the flame button until the timer button flashes(FIG.4). Then confirm to go next to set your Wi-Fi account and password (FIG.5). Please make sure the Wi-Fi account and password you set are correct and Wi-Fi signal is good. 4.
Page 19
6. Now you are in the interface like FIG.8. You can operate the fireplace via Wi-Fi (FIG.8/ FIG.9/ FIG.10/ FIG.11). FIG.8 FIG.9 FIG.10 FIG.11...
REPLACEMENT PARTS There is a QR code where the arrow is marked in below image (The QR code is on the left top behind the front glass). Scan the code to get the replacement parts list for your reference. You will get a detailed parts list with images. *There is a QR code in page 2 of the manual, at the bottom of the table of contents.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out. Inspect the LED’s and replace them if necessary. Back black cloth is falling off Change a flicker and back black cloth. and rolled up in the flicker. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and...
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:...
Should a product or part covered by this limited warranty be proven to be defective, in material or workmanship, and during the two (2) year limited warranty period, Amantii will replace such defective product or part without charge. If Amantii is unable to replace such product, or if replacement is not commercially practicable or cannot be timely done, in its sole discretion Amantii may, in lieu of replacement, choose to refund the purchase price for such product or part.
The provisions of the United Nations Convention on Contracts for the Sale of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty. GENERAL Amantii reserves the right to make changes at any time without notice, in design, material, specifi cations, prices and the right to discontinue styles and products. GLASS...
Page 26
Technical Support: 877.850.9458 - Ext 5 Customer Service: 877.850.9458 - Ext 1 Or Email us at: cdn-service@amantii.com...
Need help?
Do you have a question about the CUBE-2025WM-LUMINA and is the answer not in the manual?
Questions and answers