Emerson CARRERA GRANDE ECO CF788AP01 Owner's Manual page 21

8. Wall Control Installation
3-Way Wiring Diagram:
New Construction
8.7
Screw Wall Control into Wall Box using the supplied
Screws. Leave Wall Control in "OFF" mode until Fan
installation is completed (Figure 34).
The Wall Control is supplied with a White, Ivory, and
Almond color Switch Covers. Choose the finish that
best suits your needs and snap the Cover onto the Wall
Control (Figure 34).
Next, install the other Wall Control into the Wall Box
containing the Load Wire. Connect the Black Wire
of the Wall Control to the Traveler Wire(s) already
connected to the Black Wire (in the other wall box).
Secure with Wire Connectors, supplied (Figures 35
and 36).
Connect one Black Wire of the Wall Control to the
"LOAD" (black) Wire and secure with Wire Connector,
supplied.
SCREWS (2)
SWITCH COVER
DECORATIVE WALL PLATE
Figure 34
ON/OFF SWITCH
O = OFF / — = ON
FAN/LIGHT WALL
WALL
CONTROL
BOX
NEUTRAL
WIRES
(Continued)
!
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
STANDARD WIRING FOR EXISTING
3-WAY CONTROLS
HOT BLK
3-WAY WIRING DIAGRAM: RETROFIT
HOT BLK
FAN/LIGHT
WALL CONTROL
TRAVELER WIRES
Figure 35
FAN/LIGHT
HOT
WALL
HI
LIGHT
MED
LOW CONTROL
FAN OFF
EMERSON ®
OFF ON
BLACK
TRAVELER
WIRE
NEUTRAL
RECEIVER LOCATED ON
TOP OF THE CEILING FAN
Figure 36
Please contact 1-800-654-3545 for further assistance
21
WARNING
EXISTING
WALL CONTROL
TRAVELER WIRES
BLK
BLK
BLK
HI
LIGHT
MED
LOW
FAN OFF
EMERSON ®
OFF ON
LOAD
BLACK
GROUND
emersonfans.com
ETL Model No.: CF788
LOAD
LOAD