Uart - Edge-Core AS7326-56X Programming Manual

I2C 1
I2C switch (76)
Note. PSU1 DC48V and DC12V power supply address – 0x50
PSU2 AC power supply address – 0x5B/0x53

5.5. UART

The UART port will be configured to enable UART1 only and support RJ45 or micro-usb type.
The console port interface conforms to the RJ45 and USB electrical specification.
The console port is located on the front panel. The interface supports asynchronous mode with
default eight data bits, one stop bit, and no parity. The unit will operate at the following baud rates:
•
115200 (Default)
UART
RJ45
Console
USB
Console
Pin number
EDGECORE NETWORKS CORPORATION 2018
switch_CH6
switch_CH7
switch_CH0
switch_CH1
switch_CH2
switch_CH3
switch_CH4
switch_CH5
switch_CH6
switch_CH7
PSU2 DC48V and DC12V power supply address – 0x53
PSU1 AC power supply address – 0x59/0x51
Figure 35 Uart Connection
RS232
RS232_UART_RX
USB
TO
USB_UART_RX
UART
Table 22 RS-232 Pin definition (RJ45)
Pin name
1 RJ45_RTS
3 RJ45_TXD
5 GND
SFP28 PORT 38
SFP28 PORT 40
SFP28 PORT 41
SFP28 PORT 42
SFP28 PORT 45
SFP28 PORT 43
SFP28 PORT 44
SFP28 PORT 48
SFP28 PORT 46
SFP28 PORT 47
UART1_TX
CPLD
Pin number Pin name
2 RJ45_DTR
4
6 RJ45_RXD
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
0x50, 0x51
UART1_RX
GND
120Pins
BTB
Connector
75
63
72