Table of Contents
Advertisement
7.1.4 Check the crawler tension and their conditions
It is important to check the condition of the tracks to prevent them from coming out of the
guides while you are working.
If their tension is not sufficient upon inspection, check that the tracks are not damaged
or worn. A loose tracks can easily come out from its seat.
New
If the play between the frame and the tensor lock is higher than 4mm it have to be
compensated by the Compensating washer.
New
Compensating washers are supplied with the machine, which enable the clamping lock
to compensate for the play and to perform its function again.
It is very easy to assemble and is shown in Fig. 25
7 - MAINTENANCE
...After 100 hours
5mm
30 hours
Fig. 25
SECTION 7 - MAINTENANCE
Insert the spacer
SICUREZZA
Fig. 24
35
Advertisement
Table of Contents
