Table of Contents
Advertisement
Grassland mower Safety Warnings - General advices
1)
Before starting the Mower, be sure that the SAFETY DEVICES are well working
and fitting. Without these cares the operator might work in a danger situation.
2)
This machine has been designed and manufactured for being used by one operator
only who hold the Radiocontrol. Any other use is not permitted!
3)
It is important to ensure a safe distance between the operator and the machine in
the Work Field (see cap.5.12)
4)
Before the machine is operating, read the Use and Maintenance manual thoroughly,
so that you are fully aware of all the operating controls and safety aspects of the
machine.
5)
No modification to the machine or use of not genuine spare parts can be done
without the Manufacturer consent. This praxis can lead to very dangerous and
unpredictable situation and will anyway nullify the warranty.
6)
Do not under any circumstances transport people or objects on the machine.
7)
Before use, check that all the controls and safety components are assembled and
in good condition (see chapter 2.1)
8)
Move the controls gradually; sudden engagement could cause the loose of stability
of the machine.
9)
Check anytime that all the parts all well fixed
10) This machine have not to be used by children or inexperienced persons. Operators
that are not duly trained of people that are under effect of alcohol or other
substances.
11) Before operating the machine, check that the area is clear and free of debris and
that there are no people within the Work Field. The operator will be held respon-
sible for the safety of third parties, if these are found within the Work Field. Stop
work in these cases.
12) Do not use the machine when you are tired
13) Keep away from cutting blades at all times while the machine is in operation.
Observe carefully to avoid the danger area (See chap. 5.12).
14) Use only genuine spare parts and accessories especially the safety parts (chap.2.1)
to guarantee the safety and the function of the machine.
14
2 - SAFETY NORMS
SECTION 2 - SAFETY NORMS
A - INTRODUZIONE
Advertisement
Table of Contents
