Table of Contents
Advertisement
5.11.1 LOADING ONTO OR UNLOADING FROM A TRUCK
When loading the front mower onto a truck, turn off the truck's engine, apply the truck's parking
brakes, and chock the wheels to avoid unexpected moving of the truck or trailer.
To load the machine onto a truck, fully lift up the mower deck and move straight forward at low
speed. Drive on reverse when unloading it from the truck or trailer.
Use ramps with the same or better specifications mentioned below.
Specifications of the ramps
- Length
- Width (effective width)
- Required quantity
- Capacity (one ramp)
- Ramps should have
Bind the machine to the truck or trailer using the hitch points shown in the picture Fig 17.
The machine is provided by hanging hook to be placed on the working ground by a truck
crane. The machine weight is more than 390 Kg. Be sure to use belts and hook with a
proper loading capacity.
H
H
H
Center of Gravity
26
SECTION 5 - INSTRUCTIONS FOR A SAFE USE
5 - SAFE USE
more than 4 times the height
of the platform of the truck
more than 30 cm
2 ramps
more than 250 kg
anti-skid surfaces.
Hitch Points
H
H
Fig. 17
A - INTRODUZIONE
Fig. 16
Fig. 18
Advertisement
Table of Contents
