Table of Contents
Advertisement
15) Plan well your work before starting
16) Keep the area of work clear and clean.
17) Only use the machine in clear visibility.
18) If you hit any objects during the work, stop the machine and check for any damage
immediately. For the blade and blade's fasteners integrity refer to par. 7.1.2.
19) It is advisable to keep a first aid kit handy.
20) The speed of the machine must be convenient to the environment conditions
21) Never do maintenance or cleaning works when the engine running.
22) When possible, avoid working up or down-hill. Always travel across the slope.
23) Do not work on very steep slopes more than 100% (max.45°).
24) Whenever possible, stop the machine on a flat ground.
25) Park the machine in an inaccessible place for children or unauthorized persons:
stop the machine and remove the Start key from the dashboard.
26) Follow carefully the maintenance instruction and replace always the damaged and
worn parts with genuine spare part, if necessary.
27) Storage the machine after cleaning it, only.
28) If any, it is necessary to take heed of the specific safety norms in force in the Country
where the machine is operating.
29) Never recharge the battery in confined places, in vicinity of open flames or near the
source of sparks.
30)
After storage of the machine for a long period, make a deep cleaning and lubricate
the machine according to the lubrication program.
31) Pay particular attention to all safety screens (front and rear bulkheads). Damage or
lack of them can cause serious accidents and even death.
DANGER:
Do not attempt to use the machine if some safety protections are missing or damaged.
Immediately restore these protections with original spare parts, before starting work.
2 - SAFETY NORMS
SECTION 2 - SAFETY NORMS
SICUREZZA
15
Advertisement
Table of Contents
