Table of Contents
Advertisement
SECTION 5 - INSTRUCTIONS FOR A SAFE USE
A - INTRODUZIONE
5 - SAFE USE
This section explains the various devices in the machine and shows the dangers or misuse that
must be avoided. We recommend that you carefully read and become familiar with the procedures
that will result in correct use of the machine in order to obtain maximum performance while
minimizing intrinsic risks.
Beacon-net
The flashing light provides various information about the status of the machine. It will be useful to
learn the key information presented in the diagram below.
BeaconNet
Fig. 11
Fig. 11
5.1 CONNECTION OF THE RADIO CONTROL
Turn the ignition key to "ON"in the left hand side of the Battery. An acoustic signal and the
continuous red light from Beacon-net warn that the radio control is not connected.
To connect the radio control, press the green button A (Fig. 10) on the left and wait for the green
light (H) and the blue light (L) to start flashing. When both lamps flash, press the green button A
(Fig. 10) again for one second and then release it. Both lights stop flashing and the acoustic signal
stops and the light turns green flashing: the radio control is connected. In the event of an error,
repeat the process.
5.2 MACHINE ACTIVATION (Fig.12)
Press the button (A) and (B) (Fig. 10) until the machine warn by 3
acoustic signal and the light of the Beacon light turns to fix green.
The machine is now ready to move and work.
Fig. 12
22
Advertisement
Table of Contents
