Matrix; Inpatch - K-array Kommander-KA02 I User Manual

7. Apply the output channel configuration.
8. If needed set the proper pairing channels in PBTL mode.
9. Go to the Routing section and set the proper signal routng
using the INPATCH and MATRIX.
Operating the amplifier unit with the embedded
web app doesn't proVide access to the groups
Kommander-KA02 I

MATRIX

The matrix allows to set the signal routing path between the
four amplifier's input channels and the four amplifier's output
connectors.
Blue boxes at the cross intersection between raws and columns
state an open path between sources (raw) and destinations
(columns).

INPATCH

The input patch tab allows to address the input connections
(analog and optical) and the input streamer (media player) to
the four amplifier's input channels.
The signal managed by the media player (USB, Bluetooth,
Webradio, DANTE streamer) can be routed to the amplifiers'
input channels via the Media-1 OUT and Media-2 OUT.
The Media-1 IN and Media-2 IN accept audio signals from the
input connections: this allows to route the analogue and optical
input signals to the network for multiroom streaming.
User Guide
17