K-Remuctrl Remote - K-array Kommander-KA02 I User Manual

Kommander-KA02 I
User Guide
Use only high quality speaker cables.
Wire gauges must comply with the loudspeaker
nominal impedance according to the cable run.
Leveraging on the K-array loudspeaker impedance, the
Kommander-KA02 I output channels can be connected to
multiple loudspeakers in parallel.
The following table shows some examples of the maximum
number of loudspeakers that can be connected to the
Kommander-KA02 I output channels.
Loudspeaker Max number of loudspeaker units per channel
Name Z
Lyzard-KZ1 16 Ω
Lyzard-KZ14 16 Ω
Vyper-KV25 8 Ω
Tornado-KT2 8 Ω
Truffle-KTR24 4 Ω
Truffle-KTR25 4 Ω
Truffle-KTR26 2 Ω
Rumble-KU44-2 2 Ω
The proper output configuration presets shall
be set in the K-array Connect Mobile App,
K-framework3 or embedded web app
12
CH1 CH2 CH3
4x (SE) 4x (SE) 4x (SE)
4x (SE) 4x (SE) 4x (SE)
2x (SE) 2x (SE) 2x (SE)
2x (SE) 2x (SE) 2x (SE)
2x (PBTL) or 1x (SE) 2x (PBTL) or 1x (SE)
2x (PBTL) or 1x (SE) 2x (PBTL) or 1x (SE)
1x (PBTL) 1x (PBTL)
1x (PBTL) 1x (PBTL)

K-REMUCTRL Remote

K-REMUCTRL is the optional wireless remote dedicated to
control the Kommander-KA02 I amplifier unit
In order to use the K-REMUCTRL with the Kommander-KA02 I
amplifier:
1. ensure the system software is up to date;
2. pull out the dongle from the K-REMUCTRL remote package;
3. plug the dongle to any free USB port on the amplifier rear
panel;
4. switch on both the amplifier and the K-REMUCTRL remote.
The K-REMUCTRL
rechargeable battery with a switch that can extend the batter
CH4
life when powered off.
4x (SE)
When the battery discharges to approximately 10% remaining
4x (SE)
life, the Status LED begins flashing: connect the remote's
2x (SE)
charge port to a standard USB port to recharge the internal
2x (SE)
battery; use the provided cable.
Status LED
Blinks when transmitting
Unit wake up
Press for waking up the unit from standby mode
Remote Power Switch
Slide for powering the remote
Play/Pause
Press for playing/pause the song
Mute
Press muting the output signals
The K-REMUCTRL remote works on the media player volume
only: future updates of the osKar system will make it available
for the input volumes.
Note
* The K-REMUCTRL is included in the Azimut package
.
*
remote includes a high-efficiency
Bluetooth
press for setting the system
in pairing more
Skip forward
press for skipping to the next song
Skip backward
press for skipping to the previous song
Volume up
press for rising the volume
Volume down
press for lowering the volume
Micro-USB
recharging port