Set Reference Point - Siemens SINAMICS G120 Instruction Manual
Basic positioner (epos) for cu250-2 control units
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
You have now defined the analog signals for controlling.
❒
Parameter
p2595
p2598
p2599
p2601
p2602
p2603
p2612
r2684.11
p2660
6.6.4
Set reference point
Description
Position the load, e.g. using the "jog" function, at the reference position in the machine.
Figure 6-14
Activate 'set home position'
Requirement
You have selected the "Homing" screen.
Basic positioner
Function Manual, 09/2020, FW V4.7 SP13, A5E34257659B AG
Meaning
Start referencing
Reference point coordinate, signal source
Reference point coordinate value
Flying referencing, inner window
Flying referencing, outer window
Flying referencing, relative positioning mode
Reference point approach, reference cam
Reference point set
Measured value referencing
Set reference point
Commissioning
6.6 Referencing
67
Advertisement
Table of Contents
