Connecting Cables To Sfp Modules; Connector And Cable Specifications - Cisco NCS 4201 Hardware Installation Manual

Connecting Cables to SFP Modules

Step 3
Connect the other end to the BTS patch or demarcation panel at your site.
Connecting Cables to SFP Modules
For information on connecting cables to Cisco optical and Ethernet SFP interfaces, see:
Guides.

Connector and Cable Specifications

For more information on cable specifications and pinouts, see
Cisco NCS 4201 Hardware Installation Guide
70
Installing the Cisco NCS 4201
Install and Upgrade
Troubleshooting chapter.