Table of Contents
Advertisement
REPLACING THE ACTIVEPURE® CELL
WARNING:
Always disconnect power from unit before attempting to service .
1 . Remove the three (3) screws
on each side of unit and one (1)
screw on the bottom front cover .
4 . Remove the ActivePure® Cell
and replace with a new one .
NOTE: activTek suggests replacing the ActivePure® Cell after 2 years of service to maintain
peak performance .
6
2 . Remove front cover .
5 . Replace thumb screws .
3 . Remove two (2)
thumb screws .
6 . Replace cover
and screws .
Advertisement
Table of Contents
Need help?
Do you have a question about the AP5 MBOE and is the answer not in the manual?
Questions and answers