Download Print this page
activTek A1019A Installation Manual

activTek A1019A Installation Manual

Electronic air purification system

Advertisement

Quick Links

Installation Manual
ELECTRONIC AIR PURIFICATION SYSTEM
Mini-Split Unit with ActivePure® Certified Space Technology
CAUTION: READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION.
65-00563_VA-00710_0815

Advertisement

loading

Summary of Contents for activTek A1019A

  • Page 1 Installation Manual ELECTRONIC AIR PURIFICATION SYSTEM Mini-Split Unit with ActivePure® Certified Space Technology ™ CAUTION: READ MANUAL CAREFULLY FOR PROPER PROCEDURES AND OPERATION. 65-00563_VA-00710_0815...
  • Page 2: Table Of Contents

    ActivTek Mini-Split air purification enhancement device. This unit About the ActivTek Mini-Split....2 is designed to be installed into an existing Mini-Split/HVAC system.
  • Page 3: Product Contents

    PRODUCT CONTENTS Installation Manual Velcro Pads Cell Wiring Assembly Power Wiring Assembly ActivePure Cell Ballast Assembly S/N 9950164 - Ozone Free S/N 9950166 S/N 9950165 - Ozone INSTALLATION STEPS WARNING - This unit must be installed by a licensed HVAC contractor. Failure to do so will void warranty of the product.
  • Page 4 Find suitable location for cell, near the center of the coils. Clean area to remove grease or dirt. Place cell to attach Velcro. NOTE: Remove cell by separating the Velcro. Press Velcro attached to unit firmly to ensure a good bond. Replace cell into unit.
  • Page 5 Attach Velcro to the ballast using same method as above. Red Wires Blue Wires Mount ballast in suitable Red Wires Blue Wires location. Connect wiring assemblies to ballast assembly using like colored wires as a guide. (ie; Red Wires red to red... etc.) Blue Wires...
  • Page 6: Maintenance

    S2 . Dress all wires and replace cover. MAINTENANCE Your ActivTek Mini-Split unit requires no periodic maintenance beyond normal replacement of the ActivePure® cell. Note: For optimal performance, we recommend the replacement of the ActivePure® cell every year,...
  • Page 7: Warranty

    ActivTek at 866-736-0503 with the service, please contact your ActivTek Distributor for the address serial number located on the side of the ballast. of the nearest service center or call ActivTek Customer Service at EXCLUSION OF OTHER WARRANTIES AND CONDITIONS 1-866-736-0503.
  • Page 8 This equipment has been tested and found to Name: DBG Group Investments, LLC comply with the limits for Industrial, Scientific, Model: ActivTek Mini-Split and Medical Equipment (ISM), pursuant to Part A1019A 18 of the FCC Rules. These limits are designed to...

This manual is also suitable for:

A1019b