Related Manuals for activTek activBlaster
Summary of Contents for activTek activBlaster
- Page 1 To operate your activBlaster safely and efficiently, we ask that you please take time to read the attached operations manual prior to using the equipment. All instructions and precautions should be adhered to while operating this system.
- Page 2 45.0 ppm - 10880 mg/hr MAX; 90 cfm; 120 VAC Please be sure to inspect the equipment upon receipt for any possible shipping damage. If equipment is found to be damaged, call activTek Commercial Support at 866-736-0503. SPECIFICATIONS ACTIVBLASTER US40657B Electrical 120VAC, 2.5 Amp, 50/60 Hz...
- Page 3 • Vent area before re-entering. The area may smell of ozone The activBlaster unit is designed to use a normal household voltage of 120V. In accordance with the specifications of the National when you re-enter (ozone smells like air immediately after a thunderstorm).
- Page 4 This same additional air movement in the room after the activBlaster turns off will help the ozone to decompose more rapidly making the room occupiable sooner. In many cases, ventilating a room is not an option.