Appendix B Leds; Leds - H3C WAC360 Series Installation Manual

Appendix B LEDs

LEDs

Figure 15 LEDs
(1) 100/1000Base-T autosensing Ethernet copper port status LEDs (yellow)
(2) 100/1000Base-T autosensing Ethernet copper port status LEDs (green)
(3) Power status LED (PWR)
Table 10 LED description
LED
Power status LED
100/1000 Base-T
autosensing Ethernet
copper port status
LEDs
Mark Status
Steady green
Flashing green slowly
Flashing green quickly
Steady red
PWR
Flashing red slowly
Flashing red quickly
Off
Green LED steady on
Green LED flashing
Yellow LED steady on
N/A
Yellow LED flashing
Both green and yellow
LEDs Off
24
Description
The system is starting up.
The system is operating correctly.
The system is downloading files.
The system has failed to pass the power on self
test (POST) or has detected a serious fault.
The Reset button is being pressed for more than
1 second. This operation resets the device.
The Reset button is being pressed for more than
5 seconds. This operation restarts the device
with the default configuration.
No power is being input.
A 1000 Mbps link is present on the port.
The port is receiving or transmitting data at
1000 Mbps.
A 100 Mbps link is present on the port.
The port is receiving or transmitting data at 100
Mbps.
No link is present on the port.