Banner iVu BCR Gen2 Series Quick Start Manual

iVu BCR Series Sensor
Gen2
Quick Start Guide
Introduction
The iVu BCR sensor is a barcode reader used to read a variety of barcodes and to optionally compare data to known
values. The sensor has an integrated color touch screen display making installation, setup, and configuration easy without
requiring a PC.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
CAUTION: Electrostatic Discharge
Avoid the damage that electrostatic discharge (ESD) can cause to the Sensor.
Always use a proven method for preventing electrostatic discharge when installing a lens or attaching a
cable.
Original Document
178445 Rev. A
Quick Start Overview
This guide is designed to help you set up and install the iVu BCR. It provides
an overview of the sensor and illustrates how to set up the sensor to read
barcodes. The flow chart to the left provides an overview of the process.
Use of this document assumes familiarity with pertinent industry standards
and practices.
For complete information on programming, performance, troubleshooting,
dimensions, and accessories, please refer to the documentation listed below.
This documentation is available on the Product CD or at
www.bannerengineering.com. Search for the part number to view the
documentation.
• iVu BCR Gen2 with Integrated Display (datasheet; P/N 180759)
• iVu BCR Gen2 with Remote Display (datasheet; P/N 180760)
• iVu BCR Gen2 User's Manual (P/N 178445)
In addition, the sensor includes integrated Help.
23 September 2014
178445