Advertisement
Preparing For the Install (continued)
Recommended Install Locations for Trucks (Compressor)
• The toolbox is a great location for the compressor. Do not use the toolbox as a grounding point.
• Mounting the compressor/tank in the bed (if covered) is a great option.! Some full size trucks will have
room behind the seats to mount the air system.
• The engine bay is a good spot for the compressor as long as you keep it away from the exhaust manifold and
engine block. The compressor must remain upright and attached to the tank as well.
Recommended Install Locations (Horns)
• You can mount these horns in the front bumper similar to a car or underneath the bed.
• If you face the horns forward when mounted underneath they may pickup some dirt/dust from the road. This
is normal and will not damage the horn. Make sure to honk the horns regularly to keep any buildup or dust/
dirt out of the horn assembly.
Page 6
Advertisement
