Page 1
CONDUCTOR'S SPECIAL INSTALLATION MANUAL 127VX, 228VX, 238VX, 248VX WARNING: To ensure the longevity of your system, reading and following these instructions are recommended. Make sure to change filters and to drain the moisture from your tank on a regular basis.
6511 N 54th St +1 (813) 783-8058 Tampa, FL 33610 Fax: +1 (813) 783-2407 HORNBLASTERS SHOCKER ***VX INSTALLATION GUIDE BEFORE GETTING STARTED Read over the entire instruction guide before you begin your installation. KIT CONTENTS: • 5 x 18-22 Gauge Butt Connector •...
• 7/8” Wrench (1/2” Banjo) • 10mm Wrench or Socket (Air Source Mounting) I. INSTALLING YOUR HORNBLASTERS TRAIN HORNS The horns can be mounted in any direction and still be heard from all around. The horns should not be mounted where they will be completely submerged or will receive any kind of impact.
Page 4
YOU’RE DONE! It’s time to test your horns! Share your install photos on our facebook at www.facebook.com/hornblasters or instagram/twitter @hornblasters and don’t forget to check www.trainhornforums.com, the largest train horn community on the internet. www.hornblasters.com...
CAN’T FIGURE IT OUT? No problem! Give us a call at 813-783-8058, or email at support@hornblasters.com and we’ll be more than happy to help you fix you system. Also feel free to visit our online horn community, www.trainhornforums.com, for more information.
Page 6
Trainhornforums.com is the largest train horn community online and provides a place to share photos of your ride, post videos, catch up with other train horn and HornBlasters fans, meet other train horn enthusiasts, or even find help with a complicated question.
Page 7
12v power source. Then wire the other lead to the megatively charged horn wire. Also if your vehicle does not have an ignition positive source rated for 16AMPS, please use a standard 40AMP relay. www.hornblasters.com support@hornblasters.com...
Page 8
6511 N 54th St +1 (813) 783-8058 Tampa, FL 33610 Fax: +1 (813) 783-2407 www.hornblasters.com support@hornblasters.com...