Advertisement
Recommended Tools + Addons
Recommended Tools
• 3/8" Long Socket (Horn Front Mount)
• 1/2" Long Socket (Horn Rear Mount)
• 1/2" Wrench
• 7/8" Wrench (4-Way Splitter on Valve)
Compatible Add-on Kits (available @ www.HornBlasters.com)
Name
Tire Inflation Kit
Electric Drain Valve Kit
Digital Air Gauge
Six Horn Upgrade
Shocker Horn Bracket
Optional Install Items (Not required but will make your install easier)
•
Add-a-circuit - Great for tapping into a key-power source from your fuse-box.
•
Self-Tapping Screw - These can be used for ground points on the pressure switch, compressor, and valve.
•
Slotted Angle Iron - Can be used to mount the horns without making a plate.
•
Cable Ties - Used to keep your air line looking clean and organized.
•
Heat Shrink Tubing - Can be used over the terminal connectors to better seal them up against the
elements.
•
1" Adjustable Wrench - Makes it easier to get the brass fittings into the tank. You can use one wrench for
all the fittings on the system.
•
Thread Sealant - Can be used instead of Teflon to seal fittings.
• 10mm Wrench or Socket (Air Source Mounting)
• 12mm Wrench
• Drill (3/16" & 7/16" bits)
• Wire Cutter / Stripper / Crimper
Description
Adds a quick disconnect to your system which allows
you to use air tools with our kit.
Replaces the drain cock with a solenoid valve; allows
for remote draining of the system
2' Digital Air Pressure Gauge allows you to monitor the
tank pressure in the cab
Adds two more bells to the system for more
volume!
Mounting plate for the set of four horns only
Page 4
Part #
AA-TIK-H
AM-D04K
GA-220H
HU-S6-1
HB-SB-1
Advertisement
