Restarting The Network - NETGEAR ProSafe FVS338 Reference Manual

Reference Manual for the ProSafe VPN Firewall 50 FVS338

Restarting the Network

Once you've set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the FVS338
VPN firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your FVS338 VPN firewall, you are ready to access and
configure the firewall.
Preparing Your Network C-21
January 2005